Garmin da42-l360 Benutzerhandbuch
Garmin G1000 Cockpit Reference Guide for the DA42-L360
190-01062-01 Rev. A
35
hazard Avoidance
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
AFCS
GPS Nav
Flight
Planning
Pr
ocedur
es
Hazar
d
Avoidance
Additional
Featur
es
Abnormal
Oper
ation
Annun/
Alerts
Appendix
Index
hAzArD AvOiDAnCe
CustOmizing the hAzArD DisplAYs On the nAvigAtiOn mAp
1) With the Navigation Map Page displayed, press the MENU Key to display
the Navigation Map Page
Menu
. The cursor flashes on the ‘Map Setup’
option.
2) Press the ENT Key. The Map Setup Menu is displayed. Turn the small FMS
Knob to select ‘Weather’ to customize the display of weather features.
Select ‘Traffic’ to customize the display of traffic.
Select ‘Traffic’ to customize the display of traffic.
3) Press the small FMS Knob to return to the Navigation Map Page.
stOrmsCOpe
®
(OptiOnAl)
WARNING: The Stormscope system is not intended to be used for hazardous
thunderstorm penetration. Weather information on the G1000 MFD is
approved for weather avoidance only. Refer to the WX-500 Pilot’s Guide for
detailed operation.
thunderstorm penetration. Weather information on the G1000 MFD is
approved for weather avoidance only. Refer to the WX-500 Pilot’s Guide for
detailed operation.
Displaying stormscope lightning Data on the navigation map page
1) Press the MAP Softkey.
2) Press the STRMSCP Softkey. Press the STRMSCP Softkey again to remove
2) Press the STRMSCP Softkey. Press the STRMSCP Softkey again to remove
Stormscope Lightning Data from the Navigation Map Page.
Lightning Age
Symbol
Strike is less than 6 seconds old
Strike is between 6 and 60 seconds old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Strike is between 1 and 2 minutes old
Strike is between 2 and 3 minutes old
Select ‘Cell’ or ‘Strike’ as the Stormscope Lightning Mode
1) Press the MENU Key (with the Navigation Map Page displayed).
2) Turn either FMS Knob to highlight ‘Map Setup’.
3) Press the ENT Key.
4) Turn the small FMS Knob to highlight ‘Weather’.
2) Turn either FMS Knob to highlight ‘Map Setup’.
3) Press the ENT Key.
4) Turn the small FMS Knob to highlight ‘Weather’.