Mitsubishi Electronics dx-tl4709u Benutzerhandbuch

17

Basic operations

This function is used to search the start point of needed 
picture. This unit is equipped with 5 search functions (Search 
by Time and Date, Search by Alarm List, Find data storage 
location, Search by Book Mark, and Search by Motion).  In 
this section, the common search methods, search by time 
and date and search by alarm list, are described.

This item is used to search recording picture by specifying 
date, hour, minute, second, and camera number. The search 
result is displayed in still frame playback. When searching 
for 1 camera number, the search result is displayed in the 
single screen display. When searching for 2 or more camera 
numbers, it is displayed in SPLIT9 screen.

Search by Time and Date

User Menu

1.  Select “Camera Filter” and select the camera or 

cameras for the search function.

2.  Select “Search Select,” “Manual” and then set the 

month, date, year, hour, minute, and second.
•  To input the start and end points of recording, 

select “Start” and “End” respectively.

3.  Select “Search” to activate the search function.

4.  To playback the searched picture, press either the 

PLAY button or the PAUSE button.

5.  To stop playback or still frame playback, press the 

STOP button.

 To change the source device to be searched, set the 

desired device in the <Select Source Device>. (User 
Menu   Search)

 To display the single screen display of the desired camera 

number when the search result is displayed in the SPLIT9 
screen, press the desired camera number button.

 When there is no recording data of the set time, the 

picture of the closest time and date for the set camera 
number is displayed in still frame.

 When the multiple recording data of the same date and 

time are existed, execute search by time and date more 
than once until the desired picture is searched.

 Depending on the recording condition, search by time and 

date function may not operate correctly.

 When you change the display from single to split or from 

split to single during still frame playback, the recording 
picture may not be existed at that point or picture may not 
be displayed depending on the selected camera number 
or timing of displaying the still frame playback picture.