GE 21115 Benutzerhandbuch

8.  Press the OK button to store the name and number in memory. You will hear 

a confirmation tone, and the display shows:

NOTE: If you press the OK button on the base, you will not hear a 

confirmation tone, but RECORD NAME ANNOUNCEMENT? shows in the 

display. If you do not want to record the message on the base, press the 

OK button again to store the information.

For every number stored in the base directory, you may record  a voice 

message (for example, a name) with it. This phone system checks the base 

directory database when it receives CID information. If the incoming CID 

number matches a number stored in the directory, the base announces 

the corresponding recorded voice message. If there is no match, the base 

announces the CID number information. If the telephone number is “Blocked” 

or a “Private number,” it announces “Block Call.” If the telephone number is not 

provided with the CID information, the system announces, “Unknown Call.”
1.  To store or edit a number and name, refer to Storing Names And Numbers 

Memory or Editing Names And Numbers From Memory section. After the 

final step, when you press the OK button on the base, the display shows the 

following message (for 30 seconds).

2.  If you want to record the message, press VA RECORD on the base and 

wait for the beep tone. The display will show the following message for 2 

seconds.

3.  After hearing the beep tone, you can begin recording the message. Each 

record has 2-second message only. The display will show as follows and start 

to count the timer from 00 to 02.

01