GE 175d1807p270 Benutzerhandbuch

Seite von 16
PERFORMANCE
Possible Causes
What To Do
Clothes too wet
Incorrect spin cycle 
Make sure the spin cycle selected matches the load you
selected
are washing. Some fabrics will feel wetter when rinsed 
with cold water.
Colored spots
Incorrect use of fabric
Check fabric softener package for instructions and follow
softener
directions for using dispenser.
Pretreat stain and rewash.
Dye transfer
Sort whites or lightly colored items from dark colors.
Grayed or yellowed 
Not enough detergent
Use more detergent (especially with larger loads).
Hard water
Use a water conditioner like Calgon brand or install 
a water softener.
Water is not hot enough
Make sure water heater is delivering water at 
120°F.–140°F. (48°C.–60°C.).
Washer is overloaded
Select load size to match clothes load.
Detergent is not
Add detergent as wash basket fills with water before 
dissolving
you load clothes.
Dye transfer
Sort clothes by color. If fabric label states wash separately,
unstable dyes may be indicated.
Lint or residue on
Clothes are air or line dried
If you do not dry your clothes with a clothes dryer, your
clothes
clothes may retain more lint.
Incorrect sorting
Separate lint producers from lint collectors.
Washing too long
Wash small loads for a shorter time than larger loads.
Detergent not dissolving
Add detergent as wash basket fills with water, before you 
load clothes.
Try a liquid detergent.
Use warmer water temperature.
Overloading
Load clothes no higher than the top row of holes in the 
washer tub. 
Make sure load size selector matches clothes load size.
Incorrect use of fabric softener
Check fabric softener package for instructions and follow 
directions for using dispenser.
OPERATION 
Possible Causes
What To Do
Washer pauses in cycle
The washer normally pauses
between washing steps
Washer won’t operate
Washer is unplugged
Make sure cord is plugged securely into a working outlet.
Water supply is turned off
Turn both hot and cold faucets fully on.
Controls are not set
Check controls and make sure Cycle knob is pulled out 
properly
to ON position.
Lid is open
Close lid and pull Cycle knob out to ON position.
Circuit breaker/fuse is
Check house circuit breakers/fuses. Replace fuses or 
tripped/blown
reset breaker. Washer should have separate outlet.
13
Customer Service
Troubleshooting T
ips
Operating Instructions
Safety Instructions
clothes