Chevrolet avalanche 2002 Benutzerhandbuch

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow 
you to signal a turn or a lane change.

To signal a turn, move the lever all the way up 
or down. When the turn is finished, the lever 
will return automatically.

An arrow on the instrument
panel cluster will flash in
the direction of the turn 
or lane change.

To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.

If you move the lever all the way up or down, and the
arrow flashes at twice the normal rate, a signal bulb 
may be burned out and other drivers may not see your
turn signal.

If a bulb is burned out, replace it to help avoid an
accident. If the arrows don’t go on at all when you
signal a turn, check for burned

-

out bulbs or a blown 

fuse (see “Fuses and Circuit Breakers” in the Index).

If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal 
lever to off.

To change the headlamps from low to high beam or 
high to low beam, pull the multifunction lever all the
way toward you. Then release it.

When the high beams 
are on, this light on the
instrument panel cluster
also will be on.