GE EPM 5200 Benutzerhandbuch

CHAPTER 5: OVERVIEW 

32 

 

 

 

 

 

 

a.  Press POWER once. 

 

b. Press PHASE/NEXT 

for the desired hour 

function. 

 

!

This example uses 

KWH function. 

a. Press 

MAX/MIN/LIMITS  

•  once for positive 

hour reset  

•  three times for 

negative hour reset. 

 

!

 Four question marks 

appear in lower display. 

a. While the question 

marks are displayed, 

press PHASE/NEXT. A 

password entry is now 

required. 

 

!

The password is 005. 

 

b. Press PHASE/NEXT 

each time a password 

digit appears. 

 

!

 Checkmarks appear, 

indicating a successful 

reset. 

 
 

 

The EPM 5300P has two manual set limits which monitor the instantaneous readings and warn the user 
of any abnormal conditions.  Each limit detects readings either above or below a set level. The EPM 
5200P does not have this feature. 
 
SET LIMITS:  Point when the relay changes position, if the EPM 5300P is equipped with the Relay Option 
(Suffix -NL). 
 
If a limit is exceeded, only the annunciator for LM1 and/or LM2 flash.  
 
To view the setup of the LM1/LM2 set limits:  
 

•  Press MAX/MIN/LIMITS 2 times. to view the LM1 set limit momentarily.  

•  Press MAX/MIN/LIMITS 3 times to view the LM2 set limit momentarily.   

•  To locate readings that exceeded Limit 1, press MAX/MIN/LIMIT 3 times and then press 

PHASE/NEXT.  The display blanks, the middle display indicates L1, and annunciators for parameters 
that exceeded Limit 1 illuminate. 

 

•  To locate readings that exceeded Limit 2, press MAX/MIN/LIMIT 4 times and then press 

PHASE/NEXT. The display blanks, the middle display indicates L2, and annunciators for parameters 
that exceeded Limit 2 illuminate.