Lumiscope 1134 Benutzerhandbuch

12

13

To apply the cuff

A.  Plug the end of  the tubing on the 

cuff  into the connector at the base 

of  the monitor.

Applying the Cuff

Applying the Cuff

 

Main Artery

Left Arm

2~3 cm
(0.8” ~ 1.2”)

B.  Remove any clothing that restricts the upper left arm. 

Wrap the cuff  around your upper left arm. The rubber 

tube should point in the direction of  your hand.  The 

bottom edge of  the cuff  should be 0.8" ~ 1.2" (2~3 

cm) above your elbow with the tube positioned over the 

middle of  your arm.  

C.  Position the artery mark (   ) over the main artery (on 

the inside of  your arm) in the upper arm. 

 Note: 

To locate the main artery, press two fingers approximately 1" (2cm) 

above the bend of  your elbow on the inside of  your left arm

D.  To have a secure fit, pull the end of  the cuff  towards 

you, wrap it over, then press it for closure.  If the Index 

with larger circumference. 

This cuff  fits arm sizes 9.2" - 18.2".

E. 

 

Position your arm so that the cuff  is aligned at heart 

level, as shown in the diagram.