Garmin g1000 m20m Benutzerhandbuch
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
10-1
SECTION 10 – HAZARD
AVOIDANCE
SECTION 10: HAZARD AVOIDANCE
10.1 CUSTOMIZING THE HAZARD
DISPLAYS ON THE NAVIGATION MAP
1. With the Navigation Map Page displayed, press
the MENU key to display the Navigation Map
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
Page Menu. The cursor flashes on the ‘Map
Setup’ option.
2. Press the ENT key. The Map Setup Menu is
displayed. Turn the small FMS knob to select
the ‘Weather’ or ‘Traffic’ group to customize
the display of weather features. Select ‘Traffic’
to customize the display of traffic.
the ‘Weather’ or ‘Traffic’ group to customize
the display of weather features. Select ‘Traffic’
to customize the display of traffic.
3. Press the small FMS knob to return to the
Navigation Map Page.
Figure 10-1 Page Menu
Figure 10-2 Map Setup Menu
Figure 10-3 Map Setup Group List
10.2 STORMSCOPE® (OPTIONAL)
WARNING: Use of the Stormscope system for
hazardous thunderstorm penetration is prohib-
ited. Weather information on the G1000 MFD
is approved for weather avoidance only. Refer
to the WX-500 Pilot’s Guide for detailed opera-
tion.
hazardous thunderstorm penetration is prohib-
ited. Weather information on the G1000 MFD
is approved for weather avoidance only. Refer
to the WX-500 Pilot’s Guide for detailed opera-
tion.
Displaying Stormscope Lightning Data on the
Navigation Map Page
Navigation Map Page
1. Press the MAP softkey.
2. Press the STRMSCP softkey. Press the STRMSCP
2. Press the STRMSCP softkey. Press the STRMSCP
softkey again to remove Stormscope Lightning
Data from the Navigation Map Page.
Data from the Navigation Map Page.
Figure 10-4 In-Flight Navigation Map Page Displaying
Stormscope Lightning Data