Garmin g1000 m20m Benutzerhandbuch
Garmin G1000 Cockpit Reference Guide for the Mooney M20M & M20R
10-8
SECTION 10 – HAZARD
AVOIDANCE
10.5 SKYWATCH TRAFFIC ADVISORY
SYSTEM (TAS)(OPTIONAL)
Refer to the SkyWatch pilot’s guide for a detailed dis-
cussion of the SkyWatch system.
Displaying Traffic on the Traffic Map Page
1. Turn the large FMS knob to select the Map Page
Group.
2. Turn the small FMS knob to select the second
rectangular page icon.
3. Press the OPERATE softkey to begin displaying
traffic. ‘TAS OPERATING’ is displayed in the
Traffic mode field.
Traffic mode field.
4. Press the ALT MODE softkey to change the
altitude volume. Select the desired altitude
volume by pressing the the BELOW, NORMAL,
ABOVE, or UREST (unrestricted) softkey. The
selection is displayed in the Altitude mode
field.
volume by pressing the the BELOW, NORMAL,
ABOVE, or UREST (unrestricted) softkey. The
selection is displayed in the Altitude mode
field.
5. Press the STANDBY softkey to place the system
in the Standby mode. ‘TAS STANDBY’ will be
displayed in the Traffic mode field.
displayed in the Traffic mode field.
6. Rotate the Joystick clockwise to display a larger
area or rotate counter-clockwise to display a
smaller area.
smaller area.
Traffic, Out of
Range
Proximity Traffic,
1000’ above &
descending
Traffic Mode
Figure 10-12 Traffic Map Page
“Non-Bearing” Traffic (system
is unable to determine bearing),
distance is 8.0 nm, 1190’ above
and descending
Traffic Advisory,
aircraft is 400’ below
& climbing
Altitude Mode
Displaying Traffic on the Navigation Map
1. Ensure the SkyWatch system is operating. With
the Navigation Map displayed, press the MAP
softkey.
softkey.
2. Press the TRAFFIC softkey. Traffic will now be
displayed on the map.