Code Alarm hq7405 Benutzerhandbuch

Programming Guide

The keychain transmitters included with the system have been pre-

programmed at the factory, with each button pre-assigned to control a specific
function of the system.

The system will store codes from up to 4 different transmitters. If a 5

th

transmitter is programmed to the system, then the first transmitter
programmed to the system will be erased from the system’s memory.

To program new or additional transmitters:

1.  Enter the vehicle, and turn the ignition switch to the ON position.

2.  Press and release the programming button switch 3 times.

3.  The dash mounted LED will flash 1 time, and the parking lights will flash 1
time, indicating that the system is ready to accept programming of channel 1
which is LOCK.

4.  Press and hold the lock icon button of the transmitter you wish to program
for 4 seconds or until a long flash from the parking lights.

4a.  Repeat step 4 for any additional transmitter you wish to program.

5.  Press and release the programming button switch 1 time to advance to
channel 2.  The parking lights will flash 2 times and the dash mounted LED will
flash 2 times, indicating that the system is ready to accept programming for
channel 2 which is UNLOCK.

6.  Press and hold the unlock icon button of the transmitter you wish to
program for 4 seconds or until a long flash from the parking lights.

6a.  Repeat step 6 for any additional transmitter you wish to program.

7.  Press and release the programming button switch 1 time to advance to
channel 3.  The parking lights will flash 3 times and the dash mounted LED will
flash 3 times, indicating that the system is ready to accept programming for
channel 3 which is REMOTE START.

8.  Press and hold both buttons simultaneously of the transmitter you wish to
program for 4 seconds or until a long flash from the parking lights.

8a.  Repeat step 8 for any additional transmitter you wish to program.