Mackie TT24 Benutzerhandbuch

Mackie TT24 Digital  Live Console Owner’s Manual

Console Surface Controls

31

The V-Pot LEDs serve as a meter (indicating left to right) for the channel’s signal 

level. The bottom, red LED illuminates to indicate digital clipping (0 dBFS). 

Push the V-Pot knob to toggle the meter to show compressor reduction: the 

LEDs now illuminate 

counterclockwise 

(the knob controls the compressor thresh-

old setting). The bottom, red LED lights continuously to indicate the compressor 

reduction mode of the meter. This can be activated individually per channel. 

Press and hold the METERS button in the V-POT CONTROL area for two 

seconds to toggle the meter modes for all channels between channel level and 

compressor gain reduction.

The Aux send level for the channel is indicated by multiple, lit LEDs. The level 

is variable from -

∞

 to +10 dB in logarithmically scaled steps. LEDs light from 

left to right as the Aux send level increases. The maximum Aux send level is 

indicated by all the V-Pot LEDs lit. When the Aux send is set to unity (approx-

imately 3:00), the bottom V-Pot LED illuminates. 

Rotate the V-Pot to control the selected send level for that channel. Push the 

V-Pot to toggle the send pre-/post-fader.

Press and hold consecutive Aux buttons in the V-Pot Control area to link them 

for stereo operation. For example, press and hold Aux 1 and 2, and the Touch-

screen displays “Link Aux Sends Aux 1 and Aux 2?” Touch OK to complete the 

operation. Aux levels are copied from odd to even Auxes when linking Aux 

sends. After linking, adjusting one aux also adjusts the other. Pressing either 

AUX SENDS button of a linked pair controls the stereo level from the V-Pots 

and both AUX SENDS buttons light. All Aux send DSP is also linked.

Aux pan is indicated for stereo-linked Aux sends by a single LED lit to illustrate 

the pan position. When the Aux pan is set to center, the top (12:00 position) and 

bottom V-Pot LEDs light.

Rotate the V-Pot to control the panning of stereo linked Aux sends. AUX PAN 

does not intercancel with the other V-Pot control knobs. When AUX PAN is 

selected, the panning function corresponds with the selected stereo Aux Sends. 

The pan for linked Aux sends varies inversely: setting one to 9:00 automatically 

sets the other to 3:00. If a mono Aux send is selected along with AUX PAN, then 

no stereo position is displayed on the V-Pot LEDs. Press AUX PAN again to 

return to normal Aux send level operation.