Konica Minolta 7216 prev1 Benutzerhandbuch
4
Configuring Printer Driver Settings
4-10
7216/7218/7220
4.3.4
Media Type
Click the down arrow button, and then select the type of media to be used
for printing.
for printing.
✎
Note
If “Auto” or “Tray 2” to “Tray 5” is selected in the
If “Auto” or “Tray 2” to “Tray 5” is selected in the
Paper Source
box,
the
Media Type
setting cannot be changed. (“Tray 3” to “Tray 5” are
available only for 7218 and 7220.)
4.3.5
Duplex
✎
Note
The “Duplex” option can be used only if the 7218/7220 is equipped
with the optional Duplex Unit.
The “Duplex” option can be used only if the 7218/7220 is equipped
with the optional Duplex Unit.
Click the down arrow button, and then select the settings for duplex (two-
sided) printing.
sided) printing.
If “Off” is selected, the printer does not print on both sides of the paper.
When duplex printing is selected, select “Long Edge” or “Short Edge” for
the binding position.
the binding position.
✎
Note
The Duplex Unit is required in order to use duplex printing. In addition,
the “Duplex” option must be added to the list of Installed Options in the
“Device Options” tab for the printer driver. When using duplex printing,
select “Plain Paper” as the Media Type.
The Duplex Unit is required in order to use duplex printing. In addition,
the “Duplex” option must be added to the list of Installed Options in the
“Device Options” tab for the printer driver. When using duplex printing,
select “Plain Paper” as the Media Type.