Hitachi cp2155ta Benutzerhandbuch
4
AUDIO
&
?
MODE
ON
STORE
Select ! "
Adjust # $
Tuning a station manually
1.
Press the yellow key twice, then the green key once to obtain Tuning menu.
2.
Press – or + to select a programme number (00 is recommended for VCR).
3.
Press P– to place the blue cursor on BAND.
4.
Press – or + to select VHF-L, VHF-H or UHF band.
5.
Press P– to move the cursor to MANUAL.
6.
Press – or + to start search in the direction required. Each time a channel is found
the search will stop.
the search will stop.
7.
Repeat step 6 until the VCR channel is found.
8.
Press P– to move the cursor to STORE.
9.
Press + to store the station with the selected programme number.
10. Press
to return to picture mode.
Should you wish to enter a name against any programme, follow the instructions given in “Naming Stored Programmes”.
Fine tuning
Fine tuning should be used for tuning weak, ghosted or patterned signals.
Use above Manual tuning, after which move the cursor to FINE using the P– key.
Use above Manual tuning, after which move the cursor to FINE using the P– key.
1.
Press – or + until best picture is obtained.
2.
When correct press P– then + .
This procedure can be used for any channel.
Press
to return to picture.
Audio Menu
Use this menu to set up and store the quality and volume of sound you prefer.
Press the red key to display the AUDIO menu.
1.
1.
Press P– or P+ key to select the adjustment you want to make, Volume, Balance, Treble,
Bass, Mode, Spatial and Headphone volume and balance.
2.
2.
Press – or + key to change the level of adjustment to your own liking. The white
bar graph shows the progress of the adjustment.
bar graph shows the progress of the adjustment.
Repeat steps 1 and 2 until you have completed all the adjustments you want to make.
3.
Press P– or P+ key to select STORE.
4.
Press – or + key to store the settings.
The word STORED will appear on the screen for several seconds to confirm this action.
Mode. When mode is selected, the – and + keys toggle the sound between the options available with
different input signals, and the options displayed depend upon the signal being received by the television, (see page 24).
Spatial . When Spatial is selected, the – and + keys switch spatial sound on
or off. When on, the spatial sound gives the impression of the speakers being further apart from each other.
Press to return to normal viewing.
different input signals, and the options displayed depend upon the signal being received by the television, (see page 24).
Spatial . When Spatial is selected, the – and + keys switch spatial sound on
or off. When on, the spatial sound gives the impression of the speakers being further apart from each other.
Press to return to normal viewing.
Normalise . This will initially reset sound controls to previously stored user values.
If held for two seconds the sound controls will be set to mid-position.
Volume Lock
. A maximum volume limit can be set on your television.
Position the cursor onto the volume control adjustment. Set the volume to the desired maximum level. Press the MUTE key on the
hand unit for a minimum of 3 seconds. The lock icon appears (coloured white) next to the volume bar graph when the lock
is set. Release the MUTE key.
To remove the volume lock, repeat as above until the lock icon disappears.
hand unit for a minimum of 3 seconds. The lock icon appears (coloured white) next to the volume bar graph when the lock
is set. Release the MUTE key.
To remove the volume lock, repeat as above until the lock icon disappears.