GE 82-POE Benutzerhandbuch

Chapter 4: Web-Based Management 

42 

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 

set up for this service, you will get an IP address assigned over the network. If you 
don't get an address in about 30 seconds, you probably don't have DHCP.  

The IP Configuration includes the IP Address, Subnet Mask and Gateway. The 
Configured column is used to view or change the IP configuration. Fill up the IP 
Address, Subnet Mask and Gateway for the device. The screen in Figure 25 appears. 

 

This page includes the following fields: 
 

Enable or disable the DHCP client function. 

When DHCP function is enabled, the Managed Switch will be assigned 
an IP address from the network DHCP server. The default IP address will 
be replaced by the assigned IP address on DHCP server. After the user 
clicks Apply, a popup dialog shows up to inform the user that when the 
DHCP client is enabled, the current IP will lose and user should find the 
new IP on the DHCP server. 

Assign the IP address that the network is using.  

If DHCP client function is enabled, this switch is configured as a DHCP 
client. The network DHCP server will assign the IP address to the switch 
and display it in this column.  

The default IP is 192.168.0.100 or the user has to assign an IP address 
manually when DHCP Client is disabled.