GE DR-1500 Benutzerhandbuch
Preparing the Housing and Camera
Rugged Dome Installation Manual
6
1038346B / February 2003
1.1 R
ETROFITTING WITH THE
UTP M
ODULE
To put the unit in UTP mode see Figure 2 and perform the following.
1) Disconnect the flying lead from the PC assembly and remove it
from the housing.
2) Disconnect the jumpers on the PC assembly.
Connected
jumpers
jumpers
Disconnected
jumpers
jumpers
Figure 2. Disconnecting jumpers on the PC assembly to enable the UTP module