ICOM ic-m801gmdss Benutzerhandbuch
7
2
PANEL DESCRIPTION
2
q RECEIVE INDICATOR
“RX” appears when signals are received or the
squelch is open.
squelch is open.
w TUNE INDICATOR
“TUNE” blinks while tuning. (p. 10)
• “TUNE” appears after tuning is completed with AT-141.
• “THRU” appears when the tuner through function is ac-
• “THRU” appears when the tuner through function is ac-
tivated.
• “SWR” appears when the antenna SWR worsens during
transmit, depending on the transmit output power. If it
appears, check your antenna system.
appears, check your antenna system.
e OPERATING MODE INDICATOR
Shows the selected operating mode.
• “J3E,” “USB,” “H3E,” “AM,” “LSB,” “J2B,” “AFS,”
“F1B,” “FSK,” “A1A” or “CW” appears depending on
operating mode and setting.
operating mode and setting.
r SIMPLEX/DUPLEX INDICATOR
“SIMP” appears when a simplex channel is se-
lected.
“DUP” appears when a duplex channel is selected.
lected.
“DUP” appears when a duplex channel is selected.
t FUNCTION INDICATOR
“ ” appears when a secondary function can be ac-
cessed.
cessed.
y CLARITY INDICATOR (p. 12)
“CLAR” appears when the clarity function is acti-
vated and shows shifting frequency in “Hz.”
vated and shows shifting frequency in “Hz.”
u SPEAKER OFF INDICATOR (p. 10)
“
” appears when the speaker output is turned
OFF.
i AGC OFF INDICATOR (p. 11)
“
” appears when the AGC OFF function is
turned ON.
o POSITION/UTC TIME INDICATOR (p. 17)
Shows position and/or UTC (or local) time. When
an IEC61162-1 data is applied to [GPS], the indica-
tion is up dated automatically.
an IEC61162-1 data is applied to [GPS], the indica-
tion is up dated automatically.
• When no IEC61162-1 data is applied, the position and
UTC time must be set in advance.
• “GPS” appears when an IEC61162-1 data is applied to
[GPS], “MNL” appears when the position is manually
set.
set.
• “UTC” appears when the offset time has not been pro-
grammed. (No “UTC” indication when offset time is pro-
grammed and shows local time.)
grammed and shows local time.)
!0 CHANNEL NUMBER INDICATION
Shows the selected channel number.
!1 S/ANTENNA CURRENT INDICATOR
Shows relative driving antenna current levels dur-
ing transmit and receiving signal strength during re-
ceive.
ing transmit and receiving signal strength during re-
ceive.
!2 NOISE BLANKER INDICATOR (p. 11)
“NB” appears when the noise blanker function is ac-
tivated.
tivated.
!3 SQUELCH INDICATOR (p. 11)
“SQL” appears when the squelch is ON.
!4 TRANSMIT INDICATOR
➥“TX” appears during transmit.
➥“TX” blinks while monitoring a transmit frequency.
(p. 10)
!5 CHANNEL NAME/RECEIVE FREQUENCY
READOUT
➥Shows the programmed channel names.
➥Shows the programmed channel names.
➥Shows receive frequency when no channel name
is programmed, or during frequency indication.
➥During DSC watch mode, displays “DSC WATCH.”
!6 TRANSMIT FREQUENCY READOUT
Shows transmit frequency.
!7 OPERATING GUIDE INDICATION
During DSC watch mode operation, shows several
types of guidance, according to the selected condi-
tion.
types of guidance, according to the selected condi-
tion.
!8 SCANNING FREQUENCY READOUT
During DSC watch mode operation, shows the pro-
grammed scan frequency.
grammed scan frequency.
• Decimal points blink.
!9 MMSI CODE INDICATION
During DSC watch mode operation, shows the pro-
grammed MMSI code.
grammed MMSI code.
@0 AUTO ACKNOWLEDGEMENT INDICATOR
Appears when the automatic acknowledgement
function is set to ON. (p. 48)
function is set to ON. (p. 48)
@1 UNREAD MESSAGE INDICATOR
Appears when an unread DSC message is avail-
able.
able.
@2 SCANNING DISTRESS FREQUENCY INDICATOR
Shows the scanning distress frequency initials for
DSC operation. (p. 43)
DSC operation. (p. 43)
A G C
S P