ICOM ic-m801gmdss Benutzerhandbuch

i

FOREWORD

Thank you for purchasing this Icom product. The IC-
M801GMDSS 

MF

/

HF MARINE TRANSCEIVER

is designed

and built with Icom’s superior technology and crafts-
manship. With proper care, this product should provide
you with years of trouble-free operation.

We want to take a couple of moments of your time to
thank you for making the IC-M801GMDSS your radio of
choice, and hope you agree with Icom’s philosophy of
“technology first.” Many hours of research and develop-
ment went into the design of your IC-M801GMDSS.

D FEATURES

❍Standard 4

×

″

❍Built-in DSC meets ITU Class A requirement

IMPORTANT

before attempting to operate the

transceiver.

This

manual contains important safety and operating in-
structions for the IC-M801GMDSS.

EXPLICIT DEFINITIONS

R WARNING HIGH VOLTAGE! NEVER

at-

tach an antenna or internal antenna connector during
transmission. This may result in an electrical shock or
burn.

R WARNING! NEVER

connect the transceiver to

an AC outlet directly. This may pose a fire hazard or
result in an electric shock.

R WARNING! NEVER

mount the transceiver

main unit overhead. The weight of the unit is approxi-
mately 8.5 kg, but its apparent weight will increase
several fold due to wave shocks or vibration. The unit
must be mounted on a flat hard surface only.

R NEVER

connect a power source of more than

31.2 V DC. This connection could cause a fire or ruin
the transceiver.

R NEVER

place the transceiver where normal oper-

ation of the ship or vehicle may be hindered or where it
could cause bodily injury.

R NEVER

let metal, wire or other objects touch any

internal part or connectors on the rear panel of the
transceiver. This may result in an electric shock.

DO NOT use chemical agents such as benzine or al-
cohol when cleaning, as they can damage the trans-
ceiver surface.

During maritime mobile operation, KEEP the trans-
ceiver and handset or microphone as far away as pos-
sible 

(at least 1 m)

from the magnetic navigation com-

pass to prevent erroneous indications.

Use Icom handset or microphones only 

(supplied or op-

tional)

. Other manufacturer’s handset or microphones

have different pin assignments, and connection to the
IC-M801GMDSS may damage the transceiver.

AVOID using or placing the transceiver in areas with
temperatures below –15°C or above +55°C. 

AVOID placing the transceiver in excessively dusty en-
vironments or in direct sunlight.

AVOID placing the transceiver against walls or putting
anything on top of the transceiver. This will obstruct
heat dissipation.

Place the unit in a secure place to avoid inadvertent
use by children.

BE CAREFUL! The transceiver main unit will become
hot when operating the transceiver continuously for
long periods.

PRECAUTIONS

R

R WARNING

Personal injury, fire hazard or electric
shock may occur.

Equipment damage may occur.

If disregarded, inconvenience only. No
risk or personal injury, fire or electric
shock.

Icom, Icom Inc. and the 

are registered trademarks of

Icom Incorporated (Japan) in the United States, the United
Kingdom, Germany, France, Spain, Russia and/or other
countries.
IBM is a registered trademark of International Business Ma-
chines.