ICOM ic-m801gmdss Benutzerhandbuch
54
13
CONNECTION AND INSTALLATION
■ Power source
The transceiver requires a regulated DC power of
26.4 V and at least 30 A.
• Direct connection to 24 V battery in your ship
26.4 V and at least 30 A.
• Direct connection to 24 V battery in your ship
through the supplied DC power cable.
R WARNING! NEVER connect the transceiver to a
battery using reverse polarity. This will damage the
transceiver.
battery using reverse polarity. This will damage the
transceiver.
CATION: Before connecting the transceiver main
unit to a battery, make sure the transceiver input
voltage suits to the battery voltage.
unit to a battery, make sure the transceiver input
voltage suits to the battery voltage.
DC power cable connection
NOTE: Use terminals for the cable connection.
• Weatherproof cap attachment
Attach the supplied weatherproof cap for each posi-
tive and negative line at the DC power terminal as
shown below.
Attach the supplied weatherproof cap for each posi-
tive and negative line at the DC power terminal as
shown below.
Weatherproof
cap
cap
Bend the
lug 90
lug 90
°
24 V
battery
Supplied
DC power cable
DC power cable
+ red
_ black
Crimp
Solder
• Ferrite core attachment
The DC power cables should be connected to the
transceiver’s main unit through the supplied ferrite core
as described below.
And the ferrite core must be placed as near as possi-
ble to the main unit.
The DC power cables should be connected to the
transceiver’s main unit through the supplied ferrite core
as described below.
And the ferrite core must be placed as near as possi-
ble to the main unit.
Ferrite core
DC power cables