ICOM ic-m801gmdss Benutzerhandbuch
58
13
CONNECTION AND INSTALLATION
■ Using the optional MB-108
The optional MB-108 mounting bracket is available for
mounting the transceiver’s main unit. The MB-108 al-
lows you to one-touch attachment/detachment capa-
bilities.
mounting the transceiver’s main unit. The MB-108 al-
lows you to one-touch attachment/detachment capa-
bilities.
CAUTION! WEAR GLOBES when in-
stalling the MB-108.
stalling the MB-108.
Edges of the MB-108 may be sharp and may easily
cut your fingers, hands, etc.
cut your fingers, hands, etc.
q Attach the mounting handles with the supplied hex
head bolts
(M6
×15)
, spring and flat washers as
below.
w Drill 7 holes of 6–8 mm (
1
⁄
4
–
5
⁄
16
in) in diameter,
using the template supplied with the MB-108.
e Attach the mounting base onto a flat surface using
with the hex head bolts
(M6
×50)
, spring and flat
washers, and nuts, supplied with the MB-108, as
below.
below.
r Mount the transceiver main unit
(mounting handles
has attached)
onto the mounting base.
t Fix the main unit by locking 4 latches on the
mounting handles.
z
x
Hex head bolt
(M6
×50)
Spring washer
Spring washer
Flat washer
Flat washer
Mounting
base
base
Nut
(M6)
Hex head bolt
(M6
×15)
Spring washer
Flat washer
Mounting
handle
handle