ICOM ic-m801gmdss Benutzerhandbuch
■ Main unit
q GROUND TERMINAL
IMPORTANT! Connects a ship’s ground. See
page 53 for details.
page 53 for details.
w DC POWER TERMINALS (pgs. 51, 54)
Accepts 24 V DC through the supplied DC power
cables.
Red terminal is for positive and black terminal is for
negative connection.
cables.
Red terminal is for positive and black terminal is for
negative connection.
e DC ISOLATE SWITCH [DC ISOLATE] (p. 51)
Turns the transceiver’s main power ON and OFF.
r TUNER CONTROL SOCKET (pgs. 51, 55)
Connects a control cable to the antenna tuner, AT-
141.
A female connector kit is supplied for antenna tuner
connection.
141.
A female connector kit is supplied for antenna tuner
connection.
t ANTENNA CONNECTOR 1 (pgs. 51, 55)
Connects a 50
Ω HF band antenna via a 50 Ω
matched coaxial cable with a PL-259 plug for both
transmit and receive operation.
transmit and receive operation.
y PRINTER CONNECTOR (pgs. 52, 63)
Connects an IBM
®
centronics or compatible printer
to print out received DSC information automatically
or manually.
or manually.
u REMOTE CONNECTOR [REMOTE] (p. 63)
Connects a cable (D-sub 9-pin) for remote control
in the IEC61162-1 format.
in the IEC61162-1 format.
i MODEM CONNECTOR [AF/MOD] (pgs. 52, 62)
Connects to an NBDP (Narrow Band Direct Print-
ing) or FAX system via a D-sub 15-pin cable.
This connector can also be used as SSB telephony
interface (600
ing) or FAX system via a D-sub 15-pin cable.
This connector can also be used as SSB telephony
interface (600
Ω).
o CONTROLLER CONNECTOR [CONTROLLER]
(p. 51)
Connects the supplied remote controller, RC-
25GMDSS.
Connects the supplied remote controller, RC-
25GMDSS.
!0 GPS CONNECTOR [GPS] (p. 52)
Input position and UTC data (IEC6112-1 format),
such as from a GPS receiver, etc., for setting your
positioning and time data automatically without
manual input for DSC operation.
such as from a GPS receiver, etc., for setting your
positioning and time data automatically without
manual input for DSC operation.
!1 SPEAKER JACK [SP] (p. 51)
Connects the supplied external speaker, SP-24E.
!2 ANTENNA CONNECTOR 2 (p. 51)
Connects a 50
Ω HF band antenna via a 50 Ω
matched coaxial cable with a PL-259 plug for DSC
receiver.
receiver.
IMPORTANT!: An HF antenna should be con-
nected to this antenna connector,
otherwise no DSC call can be re-
ceived.
otherwise no DSC call can be re-
ceived.
GPS IN (+)
RCA
GPS IN (–)
4
2
PANEL DESCRIPTION
q
w
e
r
t
y
u
i
o
!0
!1
!2
✔For detailed “ANTENNA AND GROUNDING CON-
SIDERATIONS,” see pages 71 to 73.