OKI office 87 Benutzerhandbuch
Advanced Operations
61
Initiating a Relay Broadcast
1
Load your documents.
2
Press the SELECT FUNCTION key.
3
Press the 4/RELAY INIT.-TX One-Touch key. The display shows
RELAY PASSWORD.
RELAY PASSWORD.
4
Using the numeric keypad, enter a password of up to 20 digits
which is the same as the relay keyword programmed into the relay
key station.
which is the same as the relay keyword programmed into the relay
key station.
5
Press the START key. The display shows REMOTE LIST NO.
6
Using the numeric keypad, enter a number of up to 20 digits which
corresponds to a relay group programmed into the relay key station.
corresponds to a relay group programmed into the relay key station.
7
Press the START key. The display shows SELECT LOCATION.
8
Select the location of the relay key station. Refer to the instructions
below.
below.
To Select Using
Do This
A One-Touch key
Press the One-Touch key.
An Auto Dial number
Press the AUTO DIAL key, then enter the three digit
Auto Dial number on the numeric keypad.
Auto Dial number on the numeric keypad.
A number dialed on
Dial as you would on a normal telephone.
the numeric keypad
9
Press the START key. Your MFP machine begins sending the fax.