OKI office 87 Benutzerhandbuch
78
OKIOFFICE 87 User’s Guide
FLASH/EARTH/NORMAL: If your MFP machine is connected to a
PBX, this function tells your MFP machine about the type of PBX line
your MFP machine is connected to. Available settings are normal (N),
flash (F) and earth (E).
PBX, this function tells your MFP machine about the type of PBX line
your MFP machine is connected to. Available settings are normal (N),
flash (F) and earth (E).
AUTO START: When this function is turned on, your MFP machine
automatically begins dialing as soon as you have selected a location
by pressing a One-Touch key or entering an Auto Dial code. You do
not have to press START. Available settings are on and off.
automatically begins dialing as soon as you have selected a location
by pressing a One-Touch key or entering an Auto Dial code. You do
not have to press START. Available settings are on and off.
DIAL PREFIX: If your MFP machine is connected to a PBX, use this
function to tell your MFP machine what access number is used to
obtain an outside line from your PBX. You can enter up to 4 digits. See
Connecting to a PBX in the Installation section for instructions on
changing this setting.
function to tell your MFP machine what access number is used to
obtain an outside line from your PBX. You can enter up to 4 digits. See
Connecting to a PBX in the Installation section for instructions on
changing this setting.
Changing Your Dial Parameter Settings
2:DIAL PARAMETER
YES(
YES(
) NO( /1-8)
+
+
SELECT
FUNCTION
USER
PROG
9/SPACE
ABC
2
1
Press the SELECT FUNCTION key.
2
Press the 9/USER PROG. One-Touch key.
3
On the numeric keypad, press 2. The display shows 2:DIAL PA-
RAMETER.
RAMETER.
4
Press
YES
until the display shows the dial parameter you want
to change.
5
Repeatedly press
NO
until the setting you want appears in the
display.
6
Press
YES
to confirm your selection. The name of the next dial
parameter setting appears in the display.
7
Press the SELECT FUNCTION key to finish.