Hitachi 35ux60b, 35tx10b Benutzerhandbuch

Seite von 94
HOOK-UP CABLES AND CONNECTORS 
 
18
HOOK-UP CABLES AND CONNECTORS  
 
 
 
 
 
Most video/audio connections between components can be made with shielded video 
and audio cables that have phono connectors. For best performance, video cables 
should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores 
that sell audio/video products. Below are illustrations and names of common 
connectors. 
Before purchasing any cables, be sure of the output and input connector types required 
by the various components. Also make sure the cables are the correct length. 
 
300-Ohm Twin Lead Connector 
This outdoor antenna cable must be connected to an antenna adaptor (300-Ohm to 75-
Ohm). 
 
"F" Type 75-Ohm Coaxial Antenna Connector 
For connecting RF signals (antenna or cable TV) to the antenna jack on the television. 
 
Phono Connector 
Used on all standard video and audio cables which connect to inputs and outputs 
located on the Television's front and rear jack panels. 
 
S-Video (Super Video) Connector 
This connector is used on camcorders, VCR's, and laser disc players with an S-Video 
feature in  place of the standard video cable to produce a high-quality picture.