Hitachi vhs vt-fx611a Benutzerhandbuch

Getting Started (Controls) 

 

17

DISPLAY  Used in on-screen programming and indexing. 

CLEAR  Used in on-screen programming and indexing. 

VCR/TV  Switches between viewing through the VCR and not viewing through 
the VCR. 

VOLUME  Increase or decrease the audio volume. 

PROGRAM  Used to program the timer for unattended recording. 

REW  Rewinds the videotape. 

PLAY  Starts playing a loaded videocassette. 

REC  Starts recording on the station the VCR is set to. 

VCR, TV, CATV (MODE SELECT)  Device buttons let you set the remote to 
control one of the three devices. 

0 to 9  Number buttons used in on-screen programming. Can also be used to 
change channels. (Simply press 2 or 3 digits for the channel you want--such as 0 
and 6 for channel 6, or 100/ENT and 2 and 4 for channel 124.) 

AVX  Used for recording from an auxillary input such as a stereo system. 

CHANNEL  Top button switches to the next higher channel, bottom button 
switches to the next lower channel. For these to operate, you must have preset 
your channels. 

LAST CHANNEL  Switches to the TV channel you watched previously during the 
current viewing session. 

F.FWD  Fast forwards the videotape. 

STOP  Stops a videocassette from playing, recording, pausing, rewinding--or 
anything it is doing. 

PAUSE  Temporarily stops the cassette from recording or playing. Press PAUSE 
again (or PLAY) to resume. 

Check out these possibilities: 

Low Battery 
If the remote is not working even at close range, try putting in two fresh AA 
batteries. 

 When replacing the batteries, remove the old batteries and press the POWER 

button on the remote and hold it for about 10 seconds, then insert two fresh 
batteries.