Hitachi vhs vt-fx611a Benutzerhandbuch

Advanced Operations (Stereo System) 

 

43

There are several reasons to consider hooking up your stereo system with your 
TV and VCR. 

 If your TV does not have stereo, you can get stereo quality from your VCR by 

hooking it to your stereo receiver. 

 Even if your TV does have stereo, you can get better sound by taking 

advantage of your stereo's better speakers. 

 You can record stereo audio on your VCR for longer play times, or use the 

VCR as an extra tape deck for dubbing. 

Stereo System Hookup 

To make this hookup, you need to be familiar with the options on your stereo 
system.  Look at the back of your receiver.  Probably you have AUDIO IN and 
OUT jacks for a second tape deck - labeled Tape 1 and 2, or AUX 1 and 2. 
Consult your stereo owner's manual for further information. 
You will need two audio cables - the kind with two color-coded plugs on each end 
(for left and right audio channels).  With the power off: 

 Connect the right (red) and left (white) AUDIO OUT on the VCR to the right 

and left AUDIO IN on the stereo system. 

 Connect the left and right AUDIO OUT on the stereo to the right and left 

AUDIO IN on the VCR. 
The AUDIO IN (left) on the front of the VCR handles the left-channel or monaural 
sound.  If you connect an audio source only to AUDIO IN (left), both left and right 
hi-fi tracks will record an audio signal as monaural. 

With the hookup just shown, you can use your VCR to record a custom program 
of selections from your stereo library.  The videotape recording will give you 
excellent stereo quality and a long-running tape. In this case no video will be 
recorded, so you can do the whole thing without turning on the TV. 
Assemble the selections you want to record on the stereo, and insert a blank 
VHS cassette into the VCR. Be sure that HIFI is selected in the VCR SETUP 
screen (See page 26). 

 Press DISPLAY, then press 5 on the remote control to select SP or EP.  The 

EP setting gives you reasonable audio quality and a longer tape program. 

 Press AVX on the remote control to turn the LINE (L1) indicator on. 
 Press REC/IRT on the VCR and start the stereo system audio source (Tape, 

CD, etc.). 
To stop recording, press STOP.  To play back the recording, rewind the tape and 
press PLAY.