GE dect 28165xx6 Benutzerhandbuch

33

This feature allows you to directly talk to another registered handsets or base by pressing 

the 

PUSH TO TALK button on either handset or base respectively.

1.  Make sure your phone is 

OFF (not in TALK mode).

.   Press the 

PUSH TO TALK button on base or handset.

3.   A list of registered handsets and base shows on the display.
4.   Use the 5 or 6  button to desired handset or base. The default setting at base is 

HANDSET 1 and the default setting at handset is BASE.

5.   Press the 

SELECT (SKL) to save your selection.

6.   Press and hold the 

PUSH TO TALK button to connect with the desired handset or base.

A two-way intercom is possible between the base and cordless handset(s) without 

tying up the telephone line and since the telephone line is not used, you can still receive 

incoming calls.

1.  Make sure the phone is 

OFF (not in TALK mode).

.  Press the 

int button.

3.  Use the 5 or 6 buttons to select the desired handset or base.

4.  Press the 

SELECT (SKL).

5.  The receiving handset or base is paged, a tone is sounded and the following   

 

information shows in the display:

 

Originating Handset/Base 

Receiving Handset/Base