Hitachi c32wf540n Benutzerhandbuch

GB - 14 -

Go to the Tuning menu and using the

buttons

select Fine Tuning. Then press and hold the

button will

cause the fine tuning to be carried out in the forwards direc-
tion, pressing the

button with cause the tuning to be

carried out in the opposite direction. When you are satisfied

with the reception of the transmission store it. To store, se-
lect STORE using the

buttons and store it by

pressing either of the

buttons.

When you select "Frequency" , the display of the Tuning

menu will be as below :

As "Frequency" is selected, TV will search according to

the channel frequencies.

With the

button, select Search. Search can be

made either forward, pressing

button or backwards,

pressing

button.

The search will be done with steps of 0.25MHz. in each

step.

If the tuned station is not the desired one, you can continue

searching pressing

button again.

When the desired station is tuned, select Store using

button and store it to the programme number

you selected pressing

button.

Now as you had selected the "Frequency", the tuning

mode of the program is stored as Frequency Search Mode.

Direct Frequency Access
If you know the broadcast band and the channel frequency

of the station you want to tune, you do not need to make
search; select Frequency, using

button in the

Frequency Mode Tuning Menu. You can type the first 3 dig-

its of the frequency using the digit buttons, and then you
can select the decimal part of the frequency by using

buttons with 250kHz steps. For example if you

want to tune the station at frequency 224.25 MHz; first you

can directly type 224. The bar at bottom of the menu will

show 224.00 . Then by increasing or decreasing with 0.25
MHz steps using

buttons, you can select the

224.25MHz .When you type and select the frequency, the

corresponding station will be displayed.

To store the station to the programme number selected, se-

lect Store option using

button and then

press

button to store it.

Now as you had selected the Frequency, the tuning

mode of the program is stored as Frequency Search Mode.

Manual Setup

The Manual Setup Menu displays the programme names

and numbers. You can use this menu to delete or insert a

channel and to auto store the programmes. This menu can
be accessed directly via the

INFO button provided the

TV is not already displaying a menu.

The Manual Setup Menu can be reached via Install in the

Main Menu.
Press the Blue button on the remote control handset this will

display the Install menu then select Manual Setup using
the

buttons. Next press either of the

buttons.

When you have entered the Manual Setup all the pro-

gramme names and numbers will be displayed on the screen.

Programme number one (1) will be in red and flashing while
all the others are in white. By using the

buttons

you can move the flashing display to select another pro-

gramme number and name.
Pressing the RED button on the remote control will retune the

channel on the flashing programme number.

To delete a channel from a programme number:
To move the red flashing display on to the channel you want

to delete.

Press the YELLOW BUTTON on the remote control. Now

the channel will be deleted and all the other channels below

this programme number will be moved up one position.

To insert a channel into a programme number:
Move the red flashing display on to the channel you want to

insert.

Press the RED BUTTON on the remote control. That chan-

nel will now be displayed on the screen.

Move the red flashing display on to the required programme

number position.

Press the GREEN BUTTON on the remote control this will

insert the channel shown on the screen into that programme

number position. The channel that was occupying that posi-

tion will be moved down one and the position from where the

selected channel was moved from will be filled by the chan-

nel below.

APS (Automatic Programming System)
The APS menu appears when you switch on your TV for the

first time.
APS automatically tunes your TV into the TV channels re-

ceived in your area.
If you wish to run the APS at another time you will have to do

the following.
Press the BLUE button on the remote control handset this

will display the Install menu then select MANUAL SETUP
using the

buttons. Next press either of the

buttons.

You are now in the MANUAL SETUP menu.
Press the BLUE button on the remote control handset. This

will select AutoTune and start APS. (Pressing the TV button

on the remote control can stop this operation.)

IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65

29.08.2002, 13:07