Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Hitachi
  4. le55a300
  5. Benutzerhandbuch

Hitachi le55a300 Benutzerhandbuch

Download
Seite von 28
Basic Receiving and Playing Operations
 
LED -LCD television Owner’s Manual  19
Reset
 
Press 
/
 to select OK or Cancel  which with Do 
you want to reset option values.
Adjust Menu
The TV can be used as a display, and you may adjust 
relevant settings.  Press SOURCE to switch the signal 
input to PC mode.
Press 
A
MENU to display the screen main menu, and 
then press 
/
 to select the Adjust menu as 
shown in the below figure.
On Time
Press 
B
/
 to select the option to be adjusted.
Press 
C
/
 to adjust it.
Image Position
 
This is used to adjusting H-Position and V-Position.
H-Size
 
Horizontal size of picture can be adjusted in this item.
V-Size
 
Vertical size of picture can be adjusted in this item.
Auto Adjust
 
Vertical and Horizontal position of picture can be 
adjusted in this item. 
Clock
 
This is used for adjusting the phase of pixel clock in PC 
mode.
Phase
 
This is used for adjusting H Position and V Position as 
well as relative parameters in PC modes.
Reset
 
Return to factory default settings.
Time Menu
Press 
A
MENU button and then use 
/
button to 
select Time menu.
Press
B
/
to select the desired option, press OK to 
enter its submenu.
Current Time:  
The current time is calculated from the 
moment upon turning the TV on. At first, check whether 
the time indicated on the TV's clock is consistent with the 
standard time of your time zone; if not, adjust the clock as 
follows:
Press 
 
•
MENU on the remote control unit or MENU 
on the TV’s front panel to display the main menu, 
and then press 
/
 to select the Timer menu, 
afterwards press 
/
 to select the Current Time 
option, press OK to enter the submenu.
Press
 
•
/
to set hour and minute.
Press 
 
•
/
 to adjust the time.
After finishing time setting, press 
 
•
OK or MENU to 
confirm.
Off Time/On Time: Set a time for the TV to turn off or 
on.
This function allows the TV to automatically turn on or 
enter standby mode upon reaching the preset time.
Press OK to enter the setting screen, and then 
 
•
press 
/
to select ON or OFF, if you select ON, 
press 
/
 to set hour and minute. ON indicates