Omron r3-1 plus Benutzerhandbuch

10

2.Preparation

Your blood pressure monitor automatically stores up to 60 

measurement values in its memory and calculates an average 

value based on the three most recent measurements taken 

within 10 minutes of the last reading. (If there are only two 

readings in memory for that period, the average will be based on 

two readings. If there is one reading in memory for that period, 

the average will be based on one reading.) To make use of the 

memory and average value function:
• Set the unit to the correct date and time before taking a 

measurement for the first time.

• If the batteries have been removed, the date and time setting 

will need to be reset.

• When the batteries are installed and the unit is turned on for 

the first time, the year digits (2005) will flash on the display.

• The range for the year setting is 2005 to 2030. If the year 

reaches 2030, it will return to 2005.

To set or reset the date and time, press the SET button.

Press the MEM button to 

advance the digits one at a 

time.

Note: If you hold down the 

MEM button, the digits 

will advance rapidly.

Press the SET button to confirm the setting when the 

desired number appears on the display.
The year setting is set and the month digits will flash.

2

3

HEM6022-E.book  Page 10  Thursday, August 21, 2008  7:54 PM