Genicom 3850 Benutzerhandbuch

131

 

4.  Insert the Rear Pull tractor assembly and the corresponding attachment area covers (with 

the slot) as shown in figure. 

 

5.  Turn the printer on. 

6.  To select the Push-Pull paper path, press the 

PATH

 

key until the 

Front 1

 led is turned on. 

To remove the Rear Pull tractor assembly: 

1.  Turn the printer off.  

2.  Push the lever on the Rear Pull tractor 

down and lift the tractor assembly out of 
the printer. 

3. Insert the Rear Pull tractor assembly 

cover and make sure that the interlock 
connector is correctly inserted.