Omron t9p Benutzerhandbuch

1. If the cuff is assembled correctly, the

hook material will be on the outside of
the cuff loop and the metal D-ring will
not touch your skin. 

2. If the cuff is not assembled, pass 

the end of the cuff furthest from 
the tubing through the metal D-ring 
to form a loop. The smooth cloth 
should be on the inside of the cuff  loop.

3. Sit in a chair with your feet flat on the

floor and place your arm on a table 
so that the cuff is at the same level 
as your heart.

4. Put your arm through the cuff  

loop. The bottom of the cuff should 
be approximately 1-2 cm
above the elbow. The Green
Marker on the cuff should lie
over the brachial artery on the
inside of the arm. Tube
should run down center of
arm approximately even 
with middle finger.

SYSTOLIC

DIASTOLIC

PULSE/min

Pile Side Material

Sewn Hook Material

D-Ring

Bottom Edge 1-2 cm

Green Marker

Cuff Tube

T9P new  (6)  7/22/02  9:47 AM  Page 10