Omron hem-432c Benutzerhandbuch

1. Avoid eating, smoking, and exercising for at least 30 minutes before

taking a measurement.

2. Put your left arm through the cuff loop. The bottom of the cuff 

should be about 1/2 inch above the elbow. The cuff tab should lie 
over the brachial artery on the inside of the arm.

3. Pull the cuff so that it is tightened evenly around your arm. Insert one

finger under cuff to check fit. Press the sewn hook material firmly 
against the pile side of the cuff. Make sure that your skin will not be 
pinched in the D-ring once you inflate the cuff. Immediately deflate 
the cuff and readjust it if skin becomes pinched.

4. Sit in a chair with your feet flat on the floor and place your left arm

on a table so that the cuff is at the same level as your heart.

5. Turn the monitor on, and after the Ready To Measure Symbol (   ) 

appears next to a zero on the digital panel, rapidly squeeze the 
inflation bulb to inflate the cuff. Stop pumping when the numbers 
on the display are approximately 40 mmHg higher than your 
normal systolic blood pressure. Do not inflate over 280 mmHg.

6. The cuf

f will deflate automatically. Remain still throughout 

the entire reading.

7. When measurement is complete, the monitor alternately displays 

your blood pressure/ pulse rate on the digital panel. Press the Air 
Release Button to remove air in the cuff.

8. Wait 2-3 minutes before taking another blood pressure measurement.