ICOM ic-f1721-d Benutzerhandbuch
21
3
BIIS OPERATION
3
D
D General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
D
D Transmitting an SDM
q While in the standby condition, push [P1] (Digital), then
push [Up] or [Down] or rotate [DIAL] to select the desired
station/group code.
station/group code.
w Push [P1] (Digital) again, then push [Up] or [Down] or
rotate [DIAL] to select the desired SDM.
Or, you can select the desired SDM using [Status Up]/
[Status Down] key directly.
[Status Down] key directly.
e Push [P0] (Call) or [PTT]* to transmit the SDM to the
selected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
M A S S A G E
1
S D M
1
SDM is displayed.
Appears
■ Transmitting an SDM
(Short Data Message)
!IC-F1721D.qxd 04.9.15 9:43 AM Page 21 (1,1)