Omron hem-712c Benutzerhandbuch

1. If the cuff is assembled correctly, the sewn

hook material will be on the outside 
of the cuff loop and the metal D-ring 
will not touch your skin.

2. Pass the end of the cuff furthest from 

the tubing through the metal D-ring to 
form a loop. The smooth cloth should 
be on the inside of the cuff loop.

3. Put your left arm through the cuff loop. 

The bottom of the cuff should be 
approximately 1/2 inch above the 
elbow. The cuff tab on the cuff 
should lie over the brachial 
artery on the inside of the arm. 
The cuff tube should run down 
center of arm even with middle finger.

Pile Material

Cuff tab

1/2 inch (12.7 mm)

D-Ring

Smooth Cloth

Sewn Hook
Material