Honeywell HRTL-One Benutzerhandbuch
Rev 1.00
26
Document 900.0259
10/04
System Setup
P
Yes = Timed recording is activated.
No = Timed recording is not activated.
9.
Press Menu to confirm your change.
10. If you have completed all your system configuration changes, press Menu again to
exit and close menu setup.
Note
Do not overlap timers. If timers overlap, the HRTL-One stops recording at
the end of the first timer interval.
the end of the first timer interval.
Recording Setup
Use the Record screen to set:
•
Image per second (IPS) ratio
•
Record quality
•
Recording format
1.
On the Main Menu screen, press S or T to select Record, then press Enter. The
following screen appears:
following screen appears:
Figure 3-7
Record Screen
2.
Press S or T to select the Record IPS (images per second) field, then press
Enter.
Enter.
Press S or T to choose from the following options:
NTSC = 1, 2, 4, 8, 15, 30, 60
OR
PAL = 1, 2, 3, 6, 12, 25, 50
(Record)
Record IPS: 60
Record Quality: Normal
Record Mode: Frame
Record Quality: Normal
Record Mode: Frame
(Menu)
Timer
Record
Alarm
Remote
System
Event
Record
Alarm
Remote
System
Event
J
J