Hotpoint wm77 Benutzerhandbuch

Seite von 20
IMPORTANT INFORMATION: Before selecting a programme, ensure the mains
button is in the ‘OFF’ position.
Add detergent and or 
conditioner to the
dispenser drawer, see 
pages 14-15. Refer to 
detergent manufacturer’s 
dosage instructions.
Select required wash
programme by turning
the wash dial clockwise,
you will hear a click as
the pointer aligns at the 
start position.
Select optional wash
features by pressing 
button, it will come out.
To cancel, press again
and button will be flush
to the console.
Sort laundry by label
into groups with the 
same wash 
requirements and 
load appliance.
Switch on both the
water & electricity 
supply at the mains.
Switch ‘ON’, after a few
seconds the Door Locked
indicator light will
illuminate and the door
will lock. This light will
remain lit throughout
the wash programme.
Close door by applying
pressure at the 
3 o’clock position.
1-2 minutes after 
completion of the wash
programme the Door
Locked indicator light
will go out and the door
can be opened.
Switch ‘OFF’ after use.
4
5
(Model WM79 only)
Select reduced spin
speed (if required) by
turning the variable spin
speed control dial.
6
1
2
3
7
8
9
Note: We recommend on
completion of your wash
programme that you switch
off both the electricity and
water supply to the
appliance.
WARNINGS
● Do not allow children to
play with the appliance
or tamper with the 
controls.
● Do not overload 
appliance! It may 
damage laundry and
reduce the quality of 
the wash.
● Do not attempt to open 
the door when the
indicator light is on.
A Typical Wash  Programme
10