Microboards Technology gx-1 Benutzerhandbuch
MICROBOARDS TECHNOLOGY, LLC GX-1 DISC PUBLISHER
5
System Requirements
The Microboards GX-1 Disc Publisher has the following minimum requirements and compatibilities:
Operating System
Microsoft Windows 2000 with SP4 or Windows XP with SP2.
Processor
Pentium 4 (or equivalent) CPU, running at 2.0 GHz or faster.
System Memory
Minimum 512 MB of system memory. More memory is suggested for DVD recording operation.
Hard Drive Space
Only 10MB of free space is required on the system hard drive for the applications and drivers. For
storing disc images, temporary space is needed for the full disc dimension. That could be up to about
800MB for CD or about 5 GB for DVD.
storing disc images, temporary space is needed for the full disc dimension. That could be up to about
800MB for CD or about 5 GB for DVD.
A separate internal 7200 RPM hard drive is recommended for storing your data. Using the same
hard drive as the operating system can cause the system to perform slowly.
hard drive as the operating system can cause the system to perform slowly.
USB Connection
USB 2.0 is required. USB 1.1 is not supported, as using USB 1.1 will result in significantly longer
recording times and the potential for recording failures.
recording times and the potential for recording failures.
Assembly and Installation
Assembly Instructions
GX-1 Disc Publisher Assembly
Remove the GX-1 Disc Publisher system from the shipping box
and confirm you received all of the items.
and confirm you received all of the items.
Place the GX-1 Disc Publisher on a stable, flat surface. You will
need room both in front and to the left of the system, as discs will
be accessed from both locations.
need room both in front and to the left of the system, as discs will
be accessed from both locations.
The input bin posts are pre-installed, with the wide post to the
front.
front.
The Reject Bin is pre-installed on the left side of the GX-1 Disc
Publisher. This bin, which slides out, should be emptied when
you know discs have been rejected.
Publisher. This bin, which slides out, should be emptied when
you know discs have been rejected.
Slide the 50-disc Output Bin into the channel between the feet at
the front of the GX-1 Disc Publisher.
the front of the GX-1 Disc Publisher.
Input Rods
Output Bin