OKI network 7120e Benutzerhandbuch

OkiLAN 7120e Network User’s Guide

25

such as Microsoft Internet Explorer Version 3.0 and higher, or Netscape 
Navigator version 3.0 and higher. No guarantees are offered for other 
browsers. Refer to the relevant manuals for details of how to launch and 
use the browser.

To apply configuration changes using a Web browser, you will be prompted 
for a username and password.The username is [root]. The default Web 
password is the last six characters of the Ethernet (MAC) address (any 
alpha characters must be in upper case). This item is case sensitive and 
can be different from the password set for AdminManager, FTP or TELNET.
The root password can be changed to allow you to configure the OkiLAN 
7120e and printer by using a Web browser. To change the root password, 
select “Password Configuration” in the Maintenance tab and follow the 
on-screen instructions.
The network addresses used in this manual are shown as examples only. 
Network addresses used in your installation must be generated from your 
own network.

1. Configure the IP Address, Subnet Mask and Gateway for the 

network card. Launch the Web browser, enter the IP Address 

of the network interface card in [Address (Location/Position)] 

and press the [Enter] key. The Printer Status screen is 

displayed.

2. Select a tab and items to be changed in the left frame. You 

need to log in as “root” to be able to configure all items. 

Non-root users cannot configure all items.

3. To ensure correct operation, follow the procedure below for 

the appropriate network browser.

4.

After making changes, click [Submit]. 

a. Select [Internet Options] in the [Tools] menu.

b. Click on the [General] tab and click [Settings] in 

[Temporary Internet files].

c.

Select [Every visit to the page] in [Check for newer 

versions of stored programs].