Roland SA-1000 Benutzerhandbuch
1
4
SD001051 2DH
Connection Guide
Copyright © 2007 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in
any form without the written permission of ROLAND CORPORATION.
When connecting the SA-1000 with other equipment, be sure to read
the owner's manuals for the SA-1000 and each device being connected.
Turn Off the Power to All Devices
Keyboard to
be connected
Adjust the Volume
Turn down the VOLUME knobs on all devices being connected to lower the
volume completely, then turn off their power.
volume completely, then turn off their power.
SA-1000's Control Panel
First, raise the keyboard's volume, then increase the SA-1000's INPUT
VOLUME settings.
VOLUME settings.
Raise the keyboard's volume to 60-70% of the
maximum level. However, if speakers are
connected, set the volume to a listenable level.
maximum level. However, if speakers are
connected, set the volume to a listenable level.
Turn all VOLUME knobs to MIN
Turn off the power
Also lower the VOLUME on the keyboard you're connecting
to the minimum level, then turn off the power. Be sure to
refer to the owner's manual for the keyboard you're
connecting before carrying out this procedure.
to the minimum level, then turn off the power. Be sure to
refer to the owner's manual for the keyboard you're
connecting before carrying out this procedure.
If using Stereo Link, the settings for the MASTER section of
both SA-1000s need to be set so they match.
both SA-1000s need to be set so they match.
Raise the volume to 60%-70%
of the maximum level.
of the maximum level.
Adjust the overall volume level
with the MASTER VOLUME knob.
with the MASTER VOLUME knob.