Kenwood th-d72a-e Benutzerhandbuch
3 PREPARATIONS FOR OPERATING APRS
TH-D72A/E
19
To configure the data band, select Menu 310 (APRS-Int.TNC-Data Band).
Figure 3-7 Menu 310 (Int.TNC – Data Band)
To configure the data speed, select Menu 311 (APRS-Int. TNC-Data Speed).
Figure 3-8 Menu 311 (Int.TNC – Data Speed)
Press the [F] + [MARK] keys to enable the internal GPS unit.
Once the internal GPS unit starts positioning (iGPS pictogram blinks), the position data from the unit
become available.
Once the internal GPS unit starts positioning (iGPS pictogram blinks), the position data from the unit
become available.
Figure 3-9 APRS Operating Frequency
To use with an external GPS receiver, disable the internal GPS unit.
To configure for a GPS terminal, select Menu 331 (APRS - COM Port).
• Baud Rate: 4800 bps (select the same baud rate as that is configured for a GPS receiver.)
• Input: GPS (enable the GPS receiver)
• Output: OFF (if no WAYPOINT, DGPS are used.)
To configure for a GPS terminal, select Menu 331 (APRS - COM Port).
• Baud Rate: 4800 bps (select the same baud rate as that is configured for a GPS receiver.)
• Input: GPS (enable the GPS receiver)
• Output: OFF (if no WAYPOINT, DGPS are used.)
3.2.4 Data Band
3.2.5 Packet Speed
3.2.6 Position
3.2.6.1 Using Internal GPS
3.2.6.2 Using GPS Receivers