Omron i-q132 Benutzerhandbuch

41

4. Handling Errors and Problems

The reading is 
extremely high (or low).

Is your arm placed 
through the arm cuff 
correctly?

Refer to Chapter 3.2.

Talking during the 
measurement.

Keep quiet during 
measurement.
Carefully read and repeat 
the steps listed under 
Chapter 3.3.

Are rolled up sleeves 
squeezing the arm?

Carefully read and repeat 
the steps listed under 
Chapter 3.3.

Is the cuff lining in the 
arm cuff damaged?

Cancel the measurement 
and contact your 
OMRON distributor or 
Customer Services.

Cuff is not inflated.

Is air leaking from the 
arm cuff?

Contact your OMRON 
distributor or Customer 
Services.

The unit operates normally and measurements 
appear to be taken, but...
• Measurements taken by a doctor are higher (or 

lower).

• Measurement results are different each time.

Refer to Chapter 7.

Power is turned off 
during measurement. 
The date and time are 
reset.

The batteries are empty.

Replace the batteries.
(Refer to Chapter 2.1.)

The backlight does not 
light.

The AC adapter is not 
connected.

The backlight does not 
light when using only the 
batteries.
Connect the AC adapter. 
(Refer to Chapter 2.2.)