Outback Power Systems vfx 3232m Benutzerhandbuch

                              

Copyright 2003  



  OutBack Power Systems, Inc. 

 

    

900-0027-1

                                                                19009 62

nd

 Ave NE, Arlington   WA 98223 USA                     

Page 38                                         

Rev 7.2

       08/26/05                                                                    Tel 360 435 6030    Fax 360 435 6019  

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
The OutBack MATE includes an INV “hot” key to allow direct control of the inverter from anywhere in the menu system.  The INV key is 
located on the right side of the MATE LCD display.  Pressing the INV key takes you to the INVERTER CONTROL menu shown below.  
A green LED indicator is located above the INV key which flashes when the inverter is either in the search or power save modes and is 
on continuously when full AC output voltage is available from the inverter.  When the inverter is turned off the green LED will not be 
illuminated.   

 

INVERTER CONTROL
currently:

ON

OFF

SRCH

ON

OK

 

 
 
Pressing the INV key once brings up the INVERTER CONTROL screen.  To turn the inverter 
ON, press the key located below the word ON.  Selecting SRCH will cause the inverter to begin 
operating in the search mode as long as the AC load connected is smaller than allowed by the 
programming of the search function.  Selecting OFF turns off the inverters AC output signal.   
 
Select  OK to return to the point in the menu system from where you entered the INVERTER 
CONTROL screen.  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

INV

 

INV