Outback Power Systems vfx 3524m Benutzerhandbuch



OutBack Power Systems, Inc.

FX & VFX Series Inverter/Charger System Installation & Programming Manual

19009 62

Ave NE, Arlington WA 98223 USA

900-0027-1

Tel 360 435 6030 Fax 360 435 6019

Rev 7.2

08/26/05

Page 37

MATE – SYSTEM CONTROLLER AND DISPLAY

‘SOFT’ KEYS

The four buttons under the LCD are referred to as the ‘soft’ keys. Their operation is dependent on what their label says. The label is the
word on the bottom line of the LCD directly above the button.

Soft keys used to navigate the menus are commonly labeled <UP>, <DOWN>, <NEXT>, <BACK>, or <TOP>.

Soft keys that change settings are labeled either with the change they will make, such as : <OFF>, <AUTO>, and <ON>, or if there are
more then a couple values that the setting can be changed to, <INC> and <DEC> are used to mean increase and decrease,
respectively.

SETUP/FX/INPUT---P00
ac transfer

GEN

control
DOWN

GRID GEN

PORT

In this example, pressing <DOWN> will take you to the next set point screen in

the SETUP/FX/INPUT menu.

SETUP/FX/INPUT---P00
Input setup
completed

TOP SETUP

MAIN

In this example, pressing <TOP> will take you to the first screen in the

SETUP/FX/INPUT menu. <SETUP> will return you to the SETUP/FX screen,

and <MAIN> will take you back to the Main screen.

SETUP/FX/INPUT---P00
ac transfer

GEN

control
DOWN

GRID GEN

PORT

In this example, pressing <GRID> will change the FX AC transfer control to

GRID mode. Conversely, pressing <GEN> will change the FX AC transfer

control to GEN mode.

SETUP/FX/INPUT---P00
ac1/grid

60.0 aac

limit
DOWN

INC

DEC

PORT

In this example, pressing <INC> or <DEC> will change the numerical value of
the ac1/grid limit setting.

ADV/FX/AUX-------P00
aux output

CoolFan

function
DOWN

INC

DEC

PORT

In this example, there are multiple operating modes for the aux output function.
Pressing <INC> or <DEC> will cycle through the available modes.