Crestron cpc-cami Benutzerhandbuch

Crestron CPC-CAMI 

Pan/Tilt Camera Head with Control Interface

The CPC-CAMI is an integrated pan/tilt head and network control interface 
belonging to the Crestron ProCam family of network camera control. The unit has 
been designed to provide control of a remotely positioned video camera site. Control 
is defined as the two-axis motion of the pan/tilt unit and the focus/zoom setting of a 
camera lens.  

The CPC-CAMI provides exclusive SpeedSmart™ technology to assure the fastest - 
yet smoothest - camera response possible. Pulse width modulation insures high 
speed resolution and the unit possesses a remarkable ability to repeat preset 
positions. When connected to a Crestron control system, the unit’s “whisper-quiet” 
movement of a camera/lens assembly is controlled by its own built-in network 
control interface.  

Four supplied jumper boards permit the support of any camera/lens assembly 
requiring an input voltage in the range of +/-2.5 to +/- 12 VDC. Thus a single  
CPC-CAMI with its four jumpers can control nearly any camera/lens in the industry. 
Refer to the table below for exact voltage outputs for each jumper board.  

NOTE:  If no jumper board is connected to the CPC-CAMI, the lens outputs are 
disconnected.  

LENS A

+/- 12 VDC differential drive

Panasonic WV-LZ81/10, Canon J6x11 REA-IA-II, 

Daiwa/CSI, and Cosmicar H6ZAHE-2P and 

C6Z1218H2ESP-2

LENS B

+/- 8 VDC differential drive

H1020812 AMSP, Daiwa/CSI, and Computar H10Z0812M

LENS C

+/- 2.5 VDC single ended drive with lens 

supplied reference (implements 2.5V to 

7.5V with lens supplied center (5V))

Fujinon MD, BMD and SD series, JVC HZ-713MD, 

Daiwa/CSI, and Canon KTS/KTS-A series

LENS D

+/- 6 VDC differential drive

Daiwa/CSI and Vicon M & MS series

 

•  1