Uniden BC246T Benutzerhandbuch

38

The display has indicators that show the scanner's cur-
rent operating status. The display information helps you 
understand how your scanner operates. The dark area 
shown above the icons in this illustration is the text dis-
play area. Information about the currently tuned fre-
quency appears here.

SYS - shows the currently activated system, appears with 

numbers (0-9). The currently active system indicator 

flashes.

ATT - appears when the attenuation feature is turned on 

(see “Setting System Attenuation (Trunked Systems 
Only)” on Page 68).

PRI - appears when the priority feature is turned on (see 

“Priority Scan” on Page 45).

 - appears when you lock the keypad (see

“Locking/Unlocking the Keypad” on Page 45).

 - alerts you when the battery power gets low.

GRP - shows the currently activated group, appears with 
numbers ( - ). The currently active group indicator 
flashes.

AM/FM/NFM - appears to show the type of transmission.
L/O - appears when you manually select a channel you 

locked out or a skip frequency.

 - appears when you hold down 

 to select a 

function.

 - appears when the scanner is set to a Close Call 

feature mode (see “Using the Close Call Feature” on 
Page 83).

0 9

F