Uniden BC246T Benutzerhandbuch
68
Programming/Editing Optional Settings
• The scanner defaults to AFS (agency, fleet, subfleet)
format - the format used in most EDACS systems.
• See “EDACS Trunking” on Page 24 for more
information about the AFS format.
Setting Control-Channel Only
(Motorola Systems Only)
(Motorola Systems Only)
Program SysteMS
E
Select the system
E
Edit Sys Option
E
Set C
-CH Only
E
This setting determines the frequencies you need to enter
for Motorola systems. Select your setting, then press E.
for Motorola systems. Select your setting, then press E.
Off
- you must enter all voice and control channel
frequencies.
On
- you only need to enter control channel frequencies.
Note: The scanner defaults to Off.
Setting System Attenuation
(Trunked Systems Only)
(Trunked Systems Only)
Program SysteMS
E
Select the system
E
Set ATTENUATION
E
This setting controls whether the attenuator will be on or
off for the current system. Select your setting then press E.
off for the current system. Select your setting then press E.
Off
- the attenuator is off.
On
- system frequencies are attenuated by about 18dB.
Notes:
• Turn on this setting if you are near other strong signal
sources. Attenuation sometimes helps to reduce
Menu
Menu