Uniden BC246T Benutzerhandbuch

85

appear for about 3 seconds. Press E when this 
appears to jump to and hold on the frequency.

If this option is turned on, the scanner overrides 

the current channel and goes to the Close Call hit. 
The scanner displays CC Found! Press Any Key. 
When you press a key, the frequency is displayed.

Turn scroll to display an option, then press E.

• Set CC Mode: Lets you select the Close Call mode.  

If you turn this option on, the scanner sets itself to 
its Close Call settings about once every 2 seconds.

Turn scroll to display an option, then press E.

You can also toggle this setting by pressing 

 

then 

• CC AutoStore: Lets you select whether the scan-

ner automatically stores Close Call hits into chan-
nels. If you turn this option on, the scanner starts 
Close Call mode and stores any Close Call hits, up 
to the maximum you specified in the Max Auto 
Store setting. If the scanner stores more hits this 
setting, it stops Autostore operation. 

Turn scroll to display an option, then press E.

When the scanner detects a Close Call hit, it alerts you 
according to the Override and Alert settings in the previ-
ous section. While listening to a Close Call hit, you can 
press Hold to hold on the hit frequency, press E to quickly 
save the frequency into memory, press L/O to lockout the 
frequency from Close Call and Search operation, or wait 
for the transmission to end.

If you are in Close Call Only or Close Call Override mode, 
and you do not press any key, the scanner returns to its 
previous operation after the transmission ends and the 
set delay time expires.

If you are holding on the frequency, press Hold again to 
resume the previous operation.