Crestron mk-qm-rmcrx Benutzerhandbuch
Mounting Kit
Crestron MK-QM-RMCRX
Installation
Tools Required
• #1 Phillips screwdriver
• ¼” Allen wrench
• ¼” Allen wrench
Mounting Instructions
The MK-QM-RMCRX attaches to the PEM nuts in the cover of the
QM-RMCRX. There are three possible mounting positions.
QM-RMCRX. There are three possible mounting positions.
• Using the top center PEM nuts in the QM-RMCRX cover
• Using the left side PEM nuts in the QM-RMCRX cover
• Using the right side PEM nuts in the QM-RMCRX cover
• Using the left side PEM nuts in the QM-RMCRX cover
• Using the right side PEM nuts in the QM-RMCRX cover
NOTE: Use care not to block the fan or the ventilation holes when
mounting the QM-RMCRX.
mounting the QM-RMCRX.
Top Cover PEM Nut Locations
2.13 in
(5.41 cm)
2.70 in
(6.86 cm)
2.02 in
(5.13 cm)
1.20 in
(3.05 cm)
● Mounting Kit: MK-QM-RMCRX
Installation Guide- DOC. 6247
2