Chevrolet camaro 2002 Benutzerhandbuch

Before your vehicle was shipped from the factory, it was
programmed in Mode 5. The mode to which the vehicle
has been programmed may have been changed since it
left the factory. To determine the mode to which your
vehicle is programmed or to program your vehicle to a
different mode, do the following:

1. Press the UNLOCK button on the remote keyless

entry transmitter.

2. Count the number of chimes you hear. The number

of chimes tells you which mode your vehicle is set
for. (If you do not wish to change the current mode,
you can either exit the programming mode by
following the instructions later in this section or
program the next feature available on your vehicle.)

3. Press the UNLOCK button again on the remote

keyless entry transmitter until you hear the number
of chimes that corresponds to the mode selection 
you want.

The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.

With this feature, you can program your vehicle to 
give verification when the theft

-

deterrent system has

been armed.

Mode 1: All Off (No horn chirps or parking lamp flash.)

Mode 2: Horn and Lamps (Your parking lamps will
flash and your horn will chirp twice to verify the system
is armed using any arming method.)

Mode 3: Horn and Lamps/Lamps (If you use the remote
keyless entry transmitter to arm the system, your
parking lamps will flash and your horn will chirp twice
to verify that the system is armed. If it only chirps once,
the hatch is open or unlatched. If you use either the
power door lock switch or passive arming, only your
parking lamps will flash for verification.)

Mode 4: Lamps (When your vehicle arms, only your
parking lamps will flash for verification.)