Omron hem-637 Benutzerhandbuch

10

Position Sensor Screen

Position Sensor OFF Screen

Position Sensor ON 
and  SIGNAL ON Screen

Position Sensor ON and 
SIGNAL OFF Screen

1.

Push the SET button while the power 
is turned off. 

Keep pressing the SET button until the
Position Sensor Screen is displayed.

2.

Select ON or OFF.

• The Position Sensor is set to ON and the

SIGNAL is set to ON (to beep) at the time
of your purchase of the monitor.

Set the (APS) function to ON or OFF and set SIGNAL of the position sensor 
to ON (beeps) or OFF (does not beep).

For setting the Position Sensor to OFF 

• To set it to ON after setting it OFF,

push the  button. 

• There is no SIGNAL setting when

the Position Sensor is set to OFF. 

Push the SET button to make 
SIGNAL ON flash. 

To set the monitor to SIGNAL OFF, push
the button. 

3.

Lock the setting.

If you are also going to change other settings, push the SET button 
to lock the setting. 

• When you push the SET button, the display changes 

to Measurement Screen.

If you want to finish after locking the setting, push the START/STOP 
button to turn off the power

.